pit-arm-exynos_defconfig

Errors

Warnings

Full log

Connected to pit console [channel connected] (~$quit to exit)
~$open

~$hardreset

Command(pit console)> open
console already open

Command(pit console)> hardreset
(user:build) Reset target
node pit             status: off
node pit             status: on


U-Boot 2013.04-gb98ed09 (Mar 07 2014 - 12:25:37) for Peach

CPU:	Exynos5420@900MHz

Board: Google Peach Pit, rev 13.2
I2C:   ready
DRAM:  3.5 GiB
PMIC max77802-pmic initialized
CPU:	Exynos5420@1800MHz
TPS65090 PMIC EC init
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
SF: Detected W25Q32DW with page size 4 KiB, total 32 MiB
In:    serial
Out:   serial
Err:   serial
SF: Detected W25Q32DW with page size 4 KiB, total 32 MiB
elog_is_event_valid: bad checksum
ELOG: Event(17) added with size 13
Net:   No ethernet found.
Hit any key to stop autoboot:  5

[PYBOOT] [pit        00:09]: u-boot: taking control.
  0 
Exynos DP init done
Peach # version
version

U-Boot 2013.04-gb98ed09 (Mar 07 2014 - 12:25:37) for Peach
armv7a-cros-linux-gnueabi-gcc.real (4.7.2_cos_gg_c8f69e0) 4.7.x-google 20130114 (prerelease)
GNU ld (binutils-2.22_cos_gg_2) 2.22
Peach # usb start
usb start
(Re)start USB...
USB0:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
USB1:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
       scanning usb for ethernet devices... 1 Ethernet Device(s) found
Peach # printenv bootargs
printenv bootargs
bootargs=console=ttySAC3,115200 earlyprintk root=/dev/mmcblk0p1 rootwait ro nosmp
Peach #setenv autoload no; setenv autoboot no
 setenv autoload no; setenv autoboot no
Peach # dhcp
dhcp
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 44
*** Unhandled DHCP Option in OFFER/ACK: 44
DHCP client bound to address x.x.x.x
Peach # setenv serverip x.x.x.x
setenv serverip x.x.x.x
Peach # tftp 0x40800000 tmpHFkafI-uImage
tftp 0x40800000 tmpHFkafI-uImage
Using asx0 device
TFTP from server x.x.x.x; our IP address is x.x.x.x
Filename 'tmpHFkafI-uImage'.
Load address: 0x40800000
Loading: *#################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ###########
	 3.3 MiB/s
done
Bytes transferred = 3976880 (3caeb0 hex)
Peach # setenv serverip x.x.x.x
setenv serverip x.x.x.x
Peach # tftp 0x42000000 tmp/pit-4IMNiC/exynos5420-peach-pit.dtb
tftp 0x42000000 tmp/pit-4IMNiC/exynos5420-peach-pit.dtb
Using asx0 device
TFTP from server x.x.x.x; our IP address is x.x.x.x
Filename 'tmp/pit-4IMNiC/exynos5420-peach-pit.dtb'.
Load address: 0x42000000
Loading: *####
	 3.1 MiB/s
done
Bytes transferred = 49085 (bfbd hex)
Peach # bootm 0x40800000 - 0x42000000

[PYBOOT] [pit        00:25]: u-boot: jumping to kernel image
bootm 0x40800000 - 0x42000000
## Booting kernel from Legacy Image at 40800000 ...
   Image Name:   Linux
   Created:      2015-04-15   7:54:01 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3976816 Bytes = 3.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 42000000
   Booting using the fdt blob at 0x42000000
   Loading Kernel Image ... OK
   Using Device Tree in place at 42000000, end 4201b4ec
boot_kernel.c: ft_board_setup: warning: g_crossystem_data is NULL

Starting kernel ...

Timer summary in microseconds:
       Mar
[PYBOOT] [pit        00:25]: u-boot: started kernel.
k    Elapsed  Stage
          0          0  reset
    128,472    128,472  board_init_f
    173,447     44,975  board_init_r
    242,328     68,881  id=64
    244,134      1,806  main_loop
  1,092,872    848,738  usb_start
  4,931,074  3,838,202  id=80
  4,931,075          1  eth_start
  5,485,707    554,632  bootp_start
 13,440,951  7,955,244  bootp_stop
 13,440,954          3  id=81
 13,440,972         18  id=82
 14,469,491  1,028,519  tftp_start
 15,630,066  1,160,575  id=84
 15,630,067          1  tftp_done
 17,461,949  1,831,882  bootm_start
 17,461,950          1  id=1
 17,466,730      4,780  id=2
 17,466,732          2  id=3
 17,508,094     41,362  id=4
 17,508,095          1  id=6
 17,508,095          0  id=5
 17,525,156     17,061  id=7
 17,536,866     11,710  id=15
 17,538,995      2,129  start_kernel

Accumulated time:
                 7,028  SPI read
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.0.0-next-20150415 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Wed Apr 15 00:47:05 PDT 2015
[    0.000000] CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: Google Peach Pit Rev 6+
[    0.000000] Ignoring memory range 0x20000000 - 0x40000000
[    0.000000] earlycon: no match for ttySAC3,115200
[    0.000000] cma: Reserved 64 MiB at 0xfbc00000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Samsung CPU ID: 0xe5420020
[    0.000000] PERCPU: Embedded 12 pages/cpu @edf4e000 s16448 r8192 d24512 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 784911
[    0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk root=/dev/mmcblk0p1 rootwait ro nosmp
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 3045780K/3145724K available (5432K kernel code, 215K rwdata, 1908K rodata, 352K init, 293K bss, 34408K reserved, 65536K cma-reserved, 2301948K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0733504   (7342 kB)
[    0.000000]       .init : 0xc0734000 - 0xc078c000   ( 352 kB)
[    0.000000]       .data : 0xc078c000 - 0xc07c1ea0   ( 216 kB)
[    0.000000]        .bss : 0xc07c4000 - 0xc080d52c   ( 294 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GIC physical location is 0x10481000
[    0.000000] L2C: failed to init: -19
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000228] Console: colour dummy device 80x30
[    0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
[    0.000252] pid_max: default: 32768 minimum: 301
[    0.000339] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000346] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000719] CPU: Testing write buffer coherency: ok
[    0.000930] CPU0: update cpu_capacity 1535
[    0.000937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.000964] Setting up static identity map for 0x40008280 - 0x400082d8
[    0.001139] ARM CCI driver probed
[    0.001554] Exynos MCPM support installed
[    0.030096] Brought up 1 CPUs
[    0.030103] SMP: Total of 1 processors activated (48.00 BogoMIPS).
[    0.030109] CPU: All CPU(s) started in SVC mode.
[    0.030447] devtmpfs: initialized
[    0.031601] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.031802] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[    0.032701] pinctrl core: initialized pinctrl subsystem
[    0.048824] NET: Registered protocol family 16
[    0.049716] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.065097] cpuidle: using governor ladder
[    0.080019] cpuidle: using governor menu
[    0.086972] exynos-audss-clk 3810000.audss-clock-controller: setup completed
[    0.093285] EXYNOS5420 PMU initialized
[    0.128033] SCSI subsystem initialized
[    0.128265] usbcore: registered new interface driver usbfs
[    0.128323] usbcore: registered new interface driver hub
[    0.128911] usbcore: registered new device driver usb
[    0.129482] s3c-i2c 12c80000.i2c: slave address 0x50
[    0.129493] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[    0.129687] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[    0.130592] Advanced Linux Sound Architecture Driver Initialized.
[    0.133185] cfg80211: Calling CRDA to update world regulatory domain
[    0.133364] Switched to clocksource mct-frc
[    0.148052] NET: Registered protocol family 2
[    0.149162] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.149217] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    0.149310] TCP: Hash tables configured (established 8192 bind 8192)
[    0.149351] UDP hash table entries: 512 (order: 2, 24576 bytes)
[    0.149374] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[    0.149526] NET: Registered protocol family 1
[    0.149703] RPC: Registered named UNIX socket transport module.
[    0.149710] RPC: Registered udp transport module.
[    0.149715] RPC: Registered tcp transport module.
[    0.149721] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.151582] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.166985] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.167677] bounce: pool size: 64 pages
[    0.167686] io scheduler noop registered
[    0.167694] io scheduler deadline registered
[    0.168008] io scheduler cfq registered (default)
[    0.168611] exynos-mipi-video-phy 10040714.video-phy: regmap lookup failed: -19
[    0.168625] exynos-mipi-video-phy 10040714.video-phy: can't request region for resource [mem 0x10040714-0x1004071f]
[    0.168640] exynos-mipi-video-phy: probe of 10040714.video-phy failed with error -16
[    0.169651] 12100000.phy supply vbus-boost not found, using dummy regulator
[    0.169971] 12500000.phy supply vbus-boost not found, using dummy regulator
[    0.172563] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
[    0.172571] dma-pl330 3880000.adma: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    0.179684] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.179692] dma-pl330 121a0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.184246] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
[    0.184254] dma-pl330 121b0000.pdma: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    0.185584] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
[    0.185592] dma-pl330 10800000.mdma: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    0.270256] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.272043] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
[    0.272381] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
[    0.272711] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
[    0.273032] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
[    0.915838] console [ttySAC3] enabled
[    0.920569] [drm] Initialized drm 1.1.0 20060810
[    0.926625] exynos-hdmi 14530000.hdmi: Failed to get supply 'vdd': -517
[    0.931799] [drm:hdmi_probe] *ERROR* failed to get regulators
[    0.937516] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed
[    0.953855] brd: module loaded
[    0.960912] loop: module loaded
[    0.964352] cros-ec-spi spi2.0: Chrome EC device registered
[    0.969361] usbcore: registered new interface driver asix
[    0.974052] usbcore: registered new interface driver ax88179_178a
[    0.980110] usbcore: registered new interface driver cdc_ether
[    0.985858] usbcore: registered new interface driver smsc75xx
[    0.991621] usbcore: registered new interface driver smsc95xx
[    0.997290] usbcore: registered new interface driver net1080
[    1.002936] usbcore: registered new interface driver cdc_subset
[    1.008841] usbcore: registered new interface driver zaurus
[    1.014417] usbcore: registered new interface driver cdc_ncm
[    1.020546] usb@12000000 supply vdd33 not found, using dummy regulator
[    1.026566] usb@12000000 supply vdd10 not found, using dummy regulator
[    1.434348] usb@12400000 supply vdd33 not found, using dummy regulator
[    1.439543] usb@12400000 supply vdd10 not found, using dummy regulator
[    1.847220] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.851325] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1
[    1.859102] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[    1.867596] xhci-hcd xhci-hcd.2.auto: irq 121, io mem 0x12000000
[    1.873694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.880314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.887515] usb usb1: Product: xHCI Host Controller
[    1.892371] usb usb1: Manufacturer: Linux 4.0.0-next-20150415 xhci-hcd
[    1.898864] usb usb1: SerialNumber: xhci-hcd.2.auto
[    1.904287] hub 1-0:1.0: USB hub found
[    1.907516] hub 1-0:1.0: 1 port detected
[    1.911684] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
[    1.916851] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2
[    1.924642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.931237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.938438] usb usb2: Product: xHCI Host Controller
[    1.943260] usb usb2: Manufacturer: Linux 4.0.0-next-20150415 xhci-hcd
[    1.949800] usb usb2: SerialNumber: xhci-hcd.2.auto
[    1.955182] hub 2-0:1.0: USB hub found
[    1.958472] hub 2-0:1.0: 1 port detected
[    1.962614] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.967776] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 3
[    1.975606] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[    1.984116] xhci-hcd xhci-hcd.5.auto: irq 122, io mem 0x12400000
[    1.990164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.996822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.004019] usb usb3: Product: xHCI Host Controller
[    2.008916] usb usb3: Manufacturer: Linux 4.0.0-next-20150415 xhci-hcd
[    2.015370] usb usb3: SerialNumber: xhci-hcd.5.auto
[    2.020755] hub 3-0:1.0: USB hub found
[    2.024055] hub 3-0:1.0: 1 port detected
[    2.028146] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.033355] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 4
[    2.041133] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.047742] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.054943] usb usb4: Product: xHCI Host Controller
[    2.059891] usb usb4: Manufacturer: Linux 4.0.0-next-20150415 xhci-hcd
[    2.066292] usb usb4: SerialNumber: xhci-hcd.5.auto
[    2.071687] hub 4-0:1.0: USB hub found
[    2.074977] hub 4-0:1.0: 1 port detected
[    2.079171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.085343] ehci-exynos: EHCI EXYNOS driver
[    2.089804] exynos-ehci 12110000.usb: EHCI Host Controller
[    2.094952] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 5
[    2.102686] exynos-ehci 12110000.usb: irq 119, io mem 0x12110000
[    2.218421] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.233400] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    2.238057] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.244712] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.251910] usb usb5: Product: EHCI Host Controller
[    2.256768] usb usb5: Manufacturer: Linux 4.0.0-next-20150415 ehci_hcd
[    2.263274] usb usb5: SerialNumber: 12110000.usb
[    2.268442] hub 5-0:1.0: USB hub found
[    2.271668] hub 5-0:1.0: 3 ports detected
[    2.276183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.281813] ohci-exynos: OHCI EXYNOS driver
[    2.286125] exynos-ohci 12120000.usb: USB Host Controller
[    2.291365] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 6
[    2.299023] exynos-ohci 12120000.usb: irq 119, io mem 0x12120000
[    2.362558] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.367910] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.375724] usb usb6: Product: USB Host Controller
[    2.379880] usb usb6: Manufacturer: Linux 4.0.0-next-20150415 ohci_hcd
[    2.386385] usb usb6: SerialNumber: 12120000.usb
[    2.390974] usb 1-1: New USB device found, idVendor=0b95, idProduct=7720
[    2.398170] hub 6-0:1.0: USB hub found
[    2.401465] hub 6-0:1.0: 3 ports detected
[    2.405370] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.413100] usbcore: registered new interface driver usb-storage
[    2.418551] usb 1-1: Product: AX88x72A
[    2.422164] usb 1-1: Manufacturer: ASIX Elec. Corp.
[    2.427590] mousedev: PS/2 mouse device common for all mice
[    2.433158] input: cros-ec-spi as /devices/platform/12d40000.spi/spi_master/spi2/spi2.0/cros-ec-keyb.1/input/input0
[    2.443040] usb 1-1: SerialNumber: 000001
[    2.448519] s3c-rtc 101e0000.rtc: failed to find rtc source clock
[    2.453731] i2c /dev entries driver
[    2.478825] max77802-rtc max77802-rtc: rtc core: registered max77802-rtc as rtc0
[    2.505774] atmel_mxt_ts 8-004b: Direct firmware load for maxtouch.cfg failed with error -2
[    2.514583] input: Atmel maXTouch Touchpad as /devices/platform/12e00000.i2c/i2c-8/8-004b/input/input1
[    2.523010] tpm_i2c_infineon 9-0020: 1.2 TPM (device-id 0x1A)
[    2.528174] atmel_mxt_ts 8-004b: Family: 130 Variant: 35 Firmware V2.0.AA Objects: 23
[    2.552775] tpm_i2c_infineon 9-0020: Issuing TPM_STARTUP
[    2.740037] tps65090 20-0048: No cache defaults, reading back from HW
[    2.780158] sbs-battery 20-000b: sbs_probe: Failed to get device status
[    2.785343] sbs-battery: probe of 20-000b failed with error -121
[    2.796489] thermal thermal_zone0: failed to read out thermal zone (-22)
[    2.801863] 10060000.tmu supply vtmu not found, using dummy regulator
[    2.808471] thermal thermal_zone1: failed to read out thermal zone (-22)
[    2.814863] 10064000.tmu supply vtmu not found, using dummy regulator
[    2.821498] thermal thermal_zone2: failed to read out thermal zone (-22)
[    2.827957] 10068000.tmu supply vtmu not found, using dummy regulator
[    2.834565] thermal thermal_zone3: failed to read out thermal zone (-22)
[    2.841157] 1006c000.tmu supply vtmu not found, using dummy regulator
[    2.847678] thermal thermal_zone4: failed to read out thermal zone (-22)
[    2.854136] 100a0000.tmu supply vtmu not found, using dummy regulator
[    2.861293] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    2.869377] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[    2.877517] Driver 'mmcblk' needs updating - please use bus_type methods
[    2.883924] sdhci: Secure Digital Host Controller Interface driver
[    2.890031] sdhci: Copyright(c) Pierre Ossman
[    2.894486] Synopsys Designware Multimedia Card Interface Driver
[    2.900833] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    2.907207] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    2.913566] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    2.918971] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 91, 64 bit host data width, 64 deep fifo
[    2.928416] dwmmc_exynos 12200000.mmc: No vmmc regulator found
[    2.934206] dwmmc_exynos 12200000.mmc: No vqmmc regulator found
[    2.968423] dwmmc_exynos 12200000.mmc: 1 slots initialized
[    2.972704] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode.
[    2.979465] dwmmc_exynos 12210000.mmc: Using internal DMA controller.
[    2.985788] dwmmc_exynos 12210000.mmc: Version ID is 250a
[    2.992166] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 92, 64 bit host data width, 64 deep fifo
[    3.002862] TPS65090_RAILSDCDC1: supplied by vbat-supply
[    3.006766] vdd_1v8: supplied by TPS65090_RAILSDCDC1
[    3.011747] dwmmc_exynos 12210000.mmc: No vmmc regulator found
[    3.017972] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    3.024375] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    3.030776] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    3.036173] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 93, 64 bit host data width, 64 deep fifo
[    3.045607] dwmmc_exynos 12220000.mmc: No vmmc regulator found
[    3.051403] dwmmc_exynos 12220000.mmc: No vqmmc regulator found
[    3.057330] usb 5-1: new high-speed USB device number 2 using exynos-ehci
[    3.091069] mmc0: MAN_BKOPS_EN bit is not set
[    3.094002] dwmmc_exynos 12220000.mmc: 1 slots initialized
[    3.100627] usbcore: registered new interface driver usbhid
[    3.105484] usbhid: USB HID core driver
[    3.109424] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    3.120496] vdd_2v: supplied by TPS65090_RAILSDCDC1
[    3.124479] mmc0: new HS200 MMC card at address 0001
[    3.128909] vdd_ldo9: supplied by vdd_2v
[    3.133811] mmcblk0: mmc0:0001 MAG2GC 14.5 GiB 
[    3.140672] mmcblk0boot0: mmc0:0001 MAG2GC partition 1 4.00 MiB
[    3.145361] mmcblk0boot1: mmc0:0001 MAG2GC partition 2 4.00 MiB
[    3.151114] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 4.00 MiB
[    3.157663]  mmcblk0: p1
[    3.163535] max98090 7-0010: MAX98090 REVID=0x43
[    3.169339] snow-audio sound: HiFi <-> 3830000.i2s mapping ok
[    3.173691] max98090 7-0010: Invalid master clock frequency
[    3.179221] snow-audio sound: ASoC: Peach-Pit-I2S-MAX98090 late_probe() failed: -22
[    3.187372] snow-audio sound: snd_soc_register_card failed (-22)
[    3.192842] snow-audio: probe of sound failed with error -22
[    3.198647] NET: Registered protocol family 17
[    3.202857] NET: Registered protocol family 15
[    3.207748] Registering SWP/SWPB emulation handler
[    3.212110] big.LITTLE switcher initializing
[    3.216319] bL_switcher_halve_cpus: no CPU pairing possible
[    3.221871] big.LITTLE switcher initialization failed
[    3.227782] vcd_led: supplied by vbat-supply
[    3.235353] vdd_1v2: supplied by TPS65090_RAILSDCDC1
[    3.238909] vdd_ldo8: supplied by vdd_1v2
[    3.242911] vdd_ldo10: supplied by vdd_2v
[    3.247009] video_mid_1a: supplied by TPS65090_RAILSDCDC1
[    3.255897] TPS65090_RAILSDCDC2: supplied by vbat-supply
[    3.259818] lcd_vdd: supplied by TPS65090_RAILSDCDC2
[    3.266529] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    3.270698] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it
[    3.278206] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1
[    3.284143] cfg80211: Calling CRDA to update world regulatory domain
[    3.290681] 7-0048 supply vdd12 not found, using dummy regulator
[    3.297330] usb 5-1: New USB device found, idVendor=2232, idProduct=1056
[    3.303499] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode.
[    3.310452] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23
[    3.320938] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.328135] dwmmc_exynos 12210000.mmc: Using internal DMA controller.
[    3.334413] usb 5-1: Product: WebCam SC-10HDM13631N
[    3.339394] dwmmc_exynos 12210000.mmc: Version ID is 250a
[    3.344667] usb 5-1: Manufacturer: Generic
[    3.348731] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 92, 64 bit host data width, 64 deep fifo
[    3.358179] usb 5-1: SerialNumber: 200901010001
[    3.363146] dwmmc_exynos 12210000.mmc: No vmmc regulator found
[    3.368740] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq
[    3.374323] vdd_1v8: operation not allowed
[    3.408432] dwmmc_exynos 12210000.mmc: 1 slots initialized
[    3.413077] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops)
[    3.427583] exynos-dp 145b0000.dp-controller: failed to get pll lock status
[    3.433437] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops)
[    3.440893] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
[    3.448461] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
[    3.455572] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.462089] [drm] No driver support for vblank timestamp query.
[    3.482416] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    3.494772] mmc2: new high speed SDIO card at address 0001
[    3.499419] mwifiex: rx work enabled, cpus 8
[    3.503536] mwifiex_sdio mmc2:0001:1: Direct firmware load for mrvl/sd8897_uapsta.bin failed with error -2
[    3.512768] mwifiex_sdio mmc2:0001:1: Failed to get firmware mrvl/sd8897_uapsta.bin
[    3.928834] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions.
[    3.947603] exynos-dp 145b0000.dp-controller: EDID Read success!
[    3.949606] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success
[    3.951184] exynos-dp 145b0000.dp-controller: Link Training success!
[    4.002698] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions.
[    4.021500] exynos-dp 145b0000.dp-controller: EDID Read success!
[    4.023526] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success
[    4.025109] exynos-dp 145b0000.dp-controller: Link Training success!
[    4.043256] Console: switching to colour frame buffer device 195x54
[    4.109862] exynos-drm exynos-drm: fb0:  frame buffer device
[    4.115499] exynos-drm exynos-drm: registered panic notifier
[    4.133396] [drm] Initialized exynos 1.0.0 20110530 on minor 0
[    4.138331] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    4.146057] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock
[    4.171689] TPS65090_RAILSLDO2: disabling
[    4.174261] TPS65090_RAILSLDO1: disabling
[    4.178213] TPS65090_RAILSDCDC3: disabling
[    4.182347] vdd_1v2_2: disabling
[    4.186126] ALSA device list:
[    4.188465]   No soundcard[    4.193124] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    4.201346] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[    4.214207] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    4.220947] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[    4.229884] devtmpfs: mounted
[    4.231568] Freeing unused kernel memory: 352
[PYBOOT] [pit        00:30]: kernel: finished booting, starting userspace.
K (c0734000 - c078c000)
[    4.240711] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[    4.246268] pgd = ed324000
[    4.248958] [00000000] *pgd=6d303831, *pte=00000000, *ppte=00000000
[    4.263445] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    4.263445] 
[    4.271090] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-next-20150415 #1
[    4.277680] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[    4.283771] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14)
[    4.291483] [<c001231c>] (show_stack) from [<c0524148>] (dump_stack+0x84/0xc4)
[    4.298678] [<c0524148>] (dump_stack) from [<c05227b4>] (panic+0x9c/0x200)
[    4.305532] [<c05227b4>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c)
[    4.312817] [<c00242e8>] (complete_and_exit) from [<00000000>] (  (null))
[    4.319583] drm_kms_helper: panic occurred, switching back to text console
[    4.326461] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
[    4.326461] 

[PYBOOT] [pit        00:31]: got exception: panic
~$off

[PYBOOT] [pit        00:32]: Done.